Daily Maintenance Management Of Metal Stamping Molds

During the use of stamping molds, due to the natural wear and tear of mold parts, unreasonable mold manufacturing processes, improper installation or use of molds on machine tools, and equipment failures, the main components of the molds can lose their original performance and accuracy. Causing the deterioration of mold technology, affecting the normal operation and efficiency of production, as well as the quality of products. So it is necessary to do a good job in maintenance to make the stamping mold work better and increase its service life. What daily maintenance do you usually need to pay attention to? There are three stages of daily maintenance that need to be noted.
1: Preparation before use of stamping molds
Before installing the mold, it is necessary to clean and maintain the surface of the mold in order to ensure that the installation surface of the mold and the working surface of the press are not damaged by pressure. It is also necessary to check whether there are any abnormalities in the fastening parts.
2: Maintenance during the use of stamping molds
Regularly lubricate the sliding components of the mold to prevent rough operation from causing wear on the surface of each sliding component. Keep track of the mold operation status and immediately shut down for maintenance if any abnormalities are found.
3: Disassembly of stamping molds after use
After using the mold, it is necessary to follow the correct operating procedure to remove the mold from the press, and it cannot be disassembled or unloaded randomly. After disassembly, it needs to be wiped clean and coated with oil to prevent rust.